| Serial to ethernet converter / Adapter of Tysso
is capable of linking serial (RS-232) devices to your computer
network via Ethernet (LAN or WAN) for access control or remote control and
monitoring purposes. eCOV-110 Serial-Ethernet Converters or Device Server are
ideal for automatic low-level remote data collecting or Point-Of-Product
applications without additional PC. No software development
knowledge is required in order to setup the serial-ethernet communication if the
VirtualCOM (Virtual Serial Port Driver) is shipped with your serial device.
Ethernet is one of the most popular way of communication on the Internet,
through it, we can connect up with PC’s, LAN and WAN. However nowadays, most
devices run on the network are Personal Computers, which cannot fulfill the
needs for low-level automatic control and remote data collection applications.
TYSSO e-COV-110 serial-ethernet converter / adapter has overcome the problems
mentioned above. It transforms serial (RS-232 to TCP/IP,
UDP... or other way round) or automatic control’s I/O data into Ethernet
data stream, which could easily transfer the information to the remote
destination via the Internet. For some applications, the e-COV-110 can
also act as a standard PC to configure and transfer data by HTTP, TCP/IP or UDP
protocols.
Implementing
automatic control and remote data control into high bandwidth is one of the
latest technologies. Tysso e-COV series easily bridges the RS-232
devices on the computer network with the following functions:
1. Converts serial data to TCP/IP data.
2. Converts the equipments’ serial (RS232) data into the TCP/IP
packet and send out by the Ethernet Data Stream (e-COV hardware must be setup
with the IP Add. and Com Port)
3. Converts TCP/IP package data into the serial data (Remote WinSock must be
setup to use the e-COV hardware).
In summary, the Tysso
eCOV-110 Serial to Ethernet Converter / Adapter is ideal for the remote control
applications, access control applications, and the factory automation
applications.
Resellers
welcome. Please contact us at sales@3cvillage.com for quantity discount.
|
|
|
Hardware
-
CPU: Winbond
W78E65P
-
Memory: 32KB RAM,
64KB Flash
-
Ethernet Port: x 1
*
Interface:
10/100 Mbps Auto sensing
*
Signal: ETX+,
ETX-, ERX+, ERX-
*
Protection:
Built-in 1.5KV Magnetic Isolation
-
Serial Port: x 1
*
Signal
RS-232:
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
*
Baud Rate: 300 ~
38400 bps
*
Parity: None,
Even, Odd
*
Data Bits: 7, 8
*
Stop Bit: 1, 2
*
Flow Control:
RTS/CTS, XON/XOFF
Software
-
Operation Mode:
TCP Server, TCP Client, UDP
-
Protocols: ICMP,
TCP, IP, UDP, DHCP, HTTP
-
Management: Web
Console, Windows Utility, Command Mode
-
Software upgrade
method: Serial port, Windows Utility
Others
-
Temperature/Humidity
*
Operating: 0~55
C(32~131 F), 5~95% RH
*
Storage: -20~85
C(-4~185 F), 5~95% RH
-
Power
Requirements:
5V~9V DC@ 300mA |
| Photos |
Click image to enlarge. |
| Retail: $195.00
SALE: $89.95
|
|
|
